Piezoelectric accelerometers for the detection of vibrations.
Vibration Sensors & Vibration Measurement Systems
Vibration sensors are piezoelectric accelerometers that sense vibration. They are used for measuring fluctuating accelerations or speeds or for normal vibration measurement. Maintenance professionals use the sensors in order to predict the maintenance of the machinery, to reduce overall costs and increase the performance of the machinery.
Examples of applications where the vibration sensors are used: process control systems, aerial navigation and underwater-applications. Frequency range from 0.2 up to 2500 Hz. The operating temperature of these sensors is between -50°C and +85°C.
我们很高兴帮助您选择最合适的vibration sensor or measurement solution. Fill in ourcontact formor contact us directly: you can find the phone numbers and e-mail addresses of yournearest location on our locations page.
Product Overview Vibration sensors
Find the right vibration sensor or vibration measurement system for your application. We’d be happy to help you choose.
Vibration Measurements: Simple and Precise
Motors and mechanical components cause vibrations in machines and plants. These vibrations should be kept as low as possible to cut back on wear and tear and avoid shutdowns. Over time, vibrations can increase due to wear and resonance. That is why many operators need to monitor the vibrations of their machines.
Vibration is measured using piezoelectric vibration sensors and matching evaluation electronics for vibration analysis. Vibration sensors are chosen based on the following criteria: required frequency range, sensitivity, and weight.
Althen provides general purpose, flexible electronic devices for vibration analysis, such as digital displays, data loggers, and long-term recorders. We also offer special software tools that we customize to suit your specific application.
OurVibroMatrix vibration measurement systemis a simple solution for measuring and analyzing vibration in industrial settings. This measurement system comprises a 2-channel A/D converter for IEPE vibration sensors and various software tools for PCs and Notebooks.
The stationaryVibroLine (VLE Series 1-8)vibration measurement system lets you continually monitor machine and plant vibrations in the long term. Thanks to the device’s 4-zone display, you can check the machines’ status at any time. VibroLine conforms with the DIN ISO 10816 / 20816 standards.
即使测量振动不是每天的任务or you, VibroLine lets you easily measure and assess vibrations – without requiring deeper knowledge of vibration measurement technology.
In addition to vibration sensors and software, Althen also provides vibration measurement related services. We can also configure your measurement system before delivery. What is more, we can handle the entire vibration measurement process for you – or train your employees on vibration measurement and the VibroMatrix and VibroLine systems.
Applications with Vibration Sensors
Would you like to get to know our products in practice? Take a look at these interesting projects from our customers:
Features & Advantages
- Many form factors available
- All sensors equipped with high-quality stainless steel casings
- Sensors suitable for use in demanding industrial settings
- Standard connectors according to IP67 protection class
- Almost all vibration sensors come with integrated amplifiers
- Submersible vibration sensors for use in depths of several hundred meters available
- Complete measurement systems for a wide variety of applications, e.g., VibroMatrixand VibroLine
Possible Applications for Vibration Sensors
- Measuring building vibrations
- Vibrations affecting humans in buildings
- Vibrations affecting humans in railway vehicles and on ships
- Vibrations affecting humans in vehicles or when working on machines
- Vibrations of wind turbines
Abnormal vibrations or high temperatures give early signs of machine failure due component imbalance, misalignment, wear or improper use of equipment. Those can be now effortlessly identified without manual measurements or expensive wired equipment to increase machine uptime and extend mean time between failures.
Together with our technology partner Treon we supply a smart industrial IoT measurement solution for condition monitoring applications. The system consists of wireless battery powered industrial sensor nodes and a gateway for communication to transmit data to the cloud.
Efficient Vibration Monitoring for Plants and Machines
Modern vibration sensors are based on apiezo-ceramicelement that is put under tension by the so-called seismic mass. Under vibration, the seismic mass strikes the piezo-ceramic element like the hammer in a piezoelectric lighter. This makes the mass emit a charge, which is amplified to create a voltage signal.
All our vibration sensors have an integrated signal amplifier, with the exception of some high-temperature models. This makes our vibration sensors especially easy to use.
At a glance, our vibration sensors differ almost only in size. Their form factor is primarily determined by two criteria: sensitivity and the required frequency band. To put it simply, low-frequency sensors are more sensitive and have larger casings than miniature sensors for high-frequency applications.
Sensitivity and Frequency
Industrial vibration sensors are suitable for measuring vibrations at medium strengths. These sensors have a sensitivity of 100 mV/g and their typical frequency band ranges from 1 Hz to 8000 Hz. At the lower end of the scale, the so-calledseismic vibration sensorsare built to detect very weak vibrations. Our reference sensor 731A has a sensitivity of 10 V/g at a typical frequency band ranging from 0.05 Hz to 500 Hz. At the other end of the spectrum, we offer vibration sensors for shock applications with measurement ranges up to 70,000 g – at frequencies well beyond 15,000 Hz.
Suitable for Rough Industrial Environments
All our vibration sensors come instainless steel casingsand are suitable fordemanding industrial applications. Their standard connectors have IP67 grade protection. We also offersubmersible vibration sensorsfor use in depths of several hundred meters.
VibroMatrix: Vibration Measurements Made Easy
Our specialized vibration measurement system VibroMatrix was developed specifically for use with submersible sensors. The InnoBeamer 2-channel A/D converter connects the available vibration sensors to a PC or notebook using a USB interface. The InnoBeamer’s power is supplied via USB as well, so that no further power supply is needed. It also provides the voltage required for the IEPE vibration sensors.
The vibration sensor receives its voltage using IEPE technology. The sensor requires DC voltage between 15 and 18 V at constant current. This is controlled by a constant-current diode. The output of the vibration sensor is then modulated up to BIAS voltage.
Unlike our force and pressure sensors, vibration sensors with integrated signal amplifiers require constant current power supply. That means that the supply electronics include a constant-current diode which supplies the right voltage at a constant current between 2 and 5 mA.
我们VIB-KS振动测量放大器nsors are ideally equipped for this task. In addition to the peak-to-peak acceleration, they also output the effective value or limit contacts.